hydraulic scales / with LCD display / for counterbalanced forklifts / for reach trucks

RCS HY-Q: ACCURATE WEIGHT AND OVERLOAD INDICATION IN ONE SYSTEM

RCS Hy-Q is a high accuracy hydraulic scale for counterbalanced trucks and reach trucks, with a full color graphic driver display. Weighing the load UP and DOWN reduces sensitivity for out of center loads, making RCS Hy-Q ideal for use in combination with roll clamps or side-shifters on the truck. On a 2.5T lift truck the RCS Hy-Q shows the weight on the forks in 2 kg increments, with a +/- 5 kg maximum error. In addition to the weight, the display also provides an overload indication in the form of a graphic load bar.

The RCS Hy-Q does not require a manifold block or return line to the hydraulic tank of the truck, but only uses a pressure sensor that is installed on a hydraulic lead via a T-piece. This makes the installation of the RCS Hy-Q easy and cost efficient. It also makes the system safer to use: an uncommanded descent of the forks because of a stuck valve is not possible.

The scale functions of the RCS Hy-Q:
•Manual zero correction, through a “zero weighing” with empty forks when the system is switched on;
•Self-learning zero correction: automatic zero correction during normal use;
•Tare weighing;
•Preset tare entry;
•Total function with five separate registers that can be named by the operator;
•Graphic overload indication, based on actual hydraulic pressure, not on calculated weight;
•Optional: data communication via RS232, Bluetooth or WiFi