electromagnetic field measuring device / embedded / for electromagnetic field mapping

The Chauvin Arnoux SHT40kV is a hand held high voltage probe. The SHT40kV probe is designed to measure voltages referenced to earth, 40 kVDC or peak and up to 28 kVAC (50/60 Hz) and suitable to be used with any existing multi-meter. ...

Chauvin Arnoux test measurement voltage absence testers (VATs) C.A 740N and C.A 760N check for the absence of voltage in compliance with Edition 2 of the IEC 61243-3 standard workplace legislation on the protection and safety of electrical ...

The HT2055, generally composed of a station and a meter-designed model, is generally designed to perform step-contact voltage measurements on electrical installations involving HV power station (TN system, electrical substation) with ...

The HT20 is a pen voltage detector engineered by HT Instruments. It is constructed in compliance to IEC/EN61010-1 safety standard in CAT IV 1000V. The device detects AC voltage from 100V to 1000V, at an operating frequency rate of ...

The FLIR VP52 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP52 to ...

In just one or two seconds, an operator can find out whether if it is secure to work around regions such as: transformer gear and circuit splitter housings, power ground wires or freshly-driven earth rods transportable dwellings, metal ...

PROFITEST PRIME The first All-in-One Tester for electrical equipment, machinery, industrial machinery, wind turbines and many other fields of applications. Thanks to the wide range of potential applications and versatile test ...

Current: 1000 A

Voltage: 0 V - 1000 V
Current: 0 mA - 1000 mA

Voltage: 0 V - 600 V
Current: 0 A - 6000 A

Current: 0 A - 400 A

The Olympus eddy current probes are comprised of acquired brands by Nortec and NDT Engineering. Over 10,000 standard and custom designed eddy current probes, accessories and standard references are available. Numerous standard design ...

Olympus's Surface Probes are highly useful in inspecting and detecting near-surface, as well as surface cracks. These basic-purpose probes consist of coils manufactured for greater frequencies with a relatively smaller diameter housing. ...

CHAUVIN ARNOUX PAC 20, 21 and 22 are professional AC/DC ammeter clamps. The PAC 2x series is based on the principle of hall-effect. It allows measurement of up to 1,400A DC and 1,000A AC. The PAC series are used for power measurement. ...

Current: 400 A

Current: 25, 32, 65, 6 A
Voltage: 230, 400 V

The CDTs by Enerdis is considered one of the best because it is very convenient and flexible. It allows the consumer to read the data remotely using the WinThor software and this advanced software is also used to supervise and manage ...

The Chauvin Arnoux group subsidiary ENERDIS has created the ULYS product range. This series consists of six different electrical energy meters for the LV and MV that are in complete accordance with IEC 61036 Class 1 product standards. ...

This range of energy meters feature 3 primary characteristics reliability, compactness and accuracy. They can now be ordered in a MID Class B Variant, which is is ideal for rebilling electrical energy particularly on private networks. ...

The transducers in this product series are able to convert reactive and active power into low level DC analog signals. In most situations, these devices are installed upstream of the analog or digital panel meters, recorders, programmable ...

CW240 power meter is a one-stop solution for improving energy efficiency, finding areas for improvement and assessing equipment lifecycles. This device is capable of providing in-depth information about an item of equipment, or even an ...

Most advanced optical power and energy meters in the market Patented self-centering zoom bar graph and Auto-Scaling Strip Chart Windows 7 and XP, 32 and 64 bit compatible software Superb sensitivity, accuracy, and speed 10 fA resolution ...

Drop-in replacement of legacy bench top 1830-C USB2.0 (1830-R) and additional GPIB/RS-232 (1830-R-GPIB) Interfaces DC power measurements in the 1 pW–2 W range CE and RoHS compliant A chirping audible tone for alignment Hot swappable among ...