isolation transformer / cast resin / DIN rail mount / single-phase

Power isolation transformer refers to the input and output winding with electrical isolation transformers, it can avoid accidental hit at the same time transformer can isolate the former vice edge coil current.
Power isolation transformer are widely used in electronic industry, mining enterprises, machine tools, equipment in general circuit of control power, security lighting and the power of light.

Characteristic：
Power range: ≤1000KVA.
Phase: Single Phase
Primary voltage: 480V/460V/440V/420V/415V/400V/380V/230V/208V/110V
Secondary voltage: 20V/24V/25V/110V/220V/380V
Frequency: 50-60Hz
Connection: Screw faston terminals
Fixing system: Angles DIN 41307
Winding: Enamelled copper wire class F/H, separated primary and secondary(galvanic separation)
Dielectric Strength: L-L, L-G 4000VAC/50Hz/60S. Free of arcing breakage
Insulation Resistance: Winding-ground 500VDC,insulation resistance ≥100MΩ
Reactor’s noise：Less than 65Db (to be measured at the point 1 meter away from the reactor horizontally) .
Protection class: IP00 or as customer required.
Insulation class: F/H
Standard: According to EN61558-2-6

Warning:
Environment exists without gas, steam, chemical deposition, dust or dirt. Explosive or corrosive medium is not allowed.