sectional doors / indoor / industrial / fireproof

The Campisa Fire Retardant Sectional Overhead Door eliminates the dead side spaces. It opens vertically and under the ceiling. Fire resistance 120 minutes.

CAMPISAFIRE OVERHEAD EI 120 is built like a sectional door. The fire-retardant panels have a step in height of about 600 mm and 104 mm thick and a weight of about 100 kg/sqm. Both sides have the same typology of finishing and fire resistance. The heart of the panel is “pulltruded” with fibreglass and special fireproof resins consolidated with catalizator that sublimate at the high temperatures leaving a resistant skeleton of fibreglass that grants for the strength also after the 1200 °C furnace tests. The sublimation does not emit tossic gas. The functioning and the installation are quite similar to that one of the sectional doors. The lifting system is the patented hydraulic FIDELITY system, and the functioning can be set on "dead man", semiautomatic, automatic.
PERFORMANCE
Installation and side spaces
The 120 minutes resisting doors are composed by the pultruded panel plus a silicate sheet each side, filled with rockwool, grey simil RAL7035 colored, if desired paint with other colours with special paint.
Installation and side spaces
CAMPISAFIRE OVERHEAD can be installed like all other sectional doors, with installations STANDARD, HI-LIFT, VERTICAL, until 900 kg of own weight. The doors 60 minutes resistance can also be installed with LOW LINTEL until 450 - 550 mm - 550 mm (depending from the dimensions and weight). Free side spaces up to 300 mm each side are required, depending from the types. They have to be on the same plane with the lintel. Always refer to the specific technical sheets