gas sampler / multi-point

Multipoint Sampler INNOVA 1409
Full remote-control from a PC via the gas monitor over the USB interface
6 to 24 sample input channels depending on the configuration
Integrates seamlessly with the Innova PAS monitors
LED indicators for active channel and interface
Self-test function
Pneumatic system constructed of AISI-316 Stainless Steel and PTFE tubing to minimize gas adsorption

LumaSense's Multipoint Sampler INNOVA 1409 can be used in conjunction with the gas monitor's INNOVA 1412i and INNOVA 1314i to provide a multi-channel monitoring system. The INNOVA 1409 greatly increases the monitoring capabilities of the gas monitors by drawing air-samples through tubing from up to 24 different sampling points and delivering the samples to the monitor.

The system has 6 to 24 inlet channels depending on the configuration. Each inlet channel has a tubemounting stub on the back-plate of the 1409; to connect each channel to the respective sampling point. The 24 channels converge into one; a three-way valve directs then the gas sample to the gas monitor for analysis, or through the external pump (optional) via the waste-air outlet on the 1409’s back-plate.


Application Areas
Area-monitoring:
Air sampling in up to 24 locations and delivery of the sample to an INNOVA photoacoustic monitor.sampling in up to 24 locations and delivery of the sample to a Photoacoustic Gas Monitor.
Leak-monitoring:
Sampling air with good spatial distribution (up to 24 sampling points) across large enclosed rooms, and delivering the sample to a central monitor unit.
Multi-point gas analysis:
Parallel processing of multiple gas cells or chambers with a unique monitor.