gas analyzer / flue gas / stack gas / carbon

Gasboard3000 flue gas analyzer can be used for measurement of the concentration of SO2 ,NO ,CO ,CO2 and O2 components in the flue gases. It is based on the micro-flow type non-dispersion infrared (NDIR) method for SO2 ,NO ,CO ,CO2 and O2 is measured by electrochemical cell method. This analyzer is designed with 19 inches 3U smaller physical dimensions.

Applications
The general application is Continuous Emission Monitoring System (CEMS), combustion efficiency monitoring for various industrial furnaces or refuse incinerator and boiler.

Specifications
Measure Gas Technology Range Resolution Precision RepetitionError
SO2 Micro-flow NDIR 2000PPM 1PPM ≤1% ≤1%
NO Micro-flow NDIR 2000PPM 1PPM ≤1% ≤1%
O2 Electrochemical 25% 0.01% ≤3% ≤2%

Measure Gas Technology Range Resolution Precision RepetitionError
CO Micro-flow NDIR 5000PPM 1PPM ≤1% ≤1%
CO2 Micro-flow NDIR 25% 0.01% ≤1% ≤1%
Note: Measurement range can be customized by the requirement.

Gas flow:0.7-1.2 L/min
Pressure of gas inlet:<1Bar
Sampling gas requirement:Remove water vapor,dust(<1um) and oil etc.
Response Time(TD+T90):<10s (ndir)
Warm-up Time:15min
Communication Interface:RS232/RS485
Output:4-20 mA
Alarm: high and low range alarm

Work Temperature:0-50℃
Relative Humidity:5-85%
Ambient Pressure:86-108kPa
Power Source Supply:10V-220V±44V AC 50Hz±1Hz
Dimension:433mm×420mm×132mm width×length×height
Weight:12kg