6-axis motion control card / advanced / stepper / servo

Feature:
32-bit PCI bus, PNP
The pulse output mode: single pulse (pulse +direction) or double-pulse (pulse + pulse),
Maximum pulse frequency 2MHz,
Support random2-6axis linear interpolation,
Linear or S curve acceleration/deceleration
Change the speed and target position in real time during motion
Motion control card with a large-capacity buffer space, the maximum can save 2048 data
6 axis stepping/servo motor control, each axis is controlled separately and won

Function:
Pulse output: Pulse output mode: six channels pulse output, pulse/direction, pulse/pulse; maximum output frequency: 2MHz; with advanced technology, the error is lower than 0.1% when the output frequency is high Coder input: Maximum input frequency: 2MHz Six-axis A/B phase difference pulse input or up/down pulse input Switching quantity input: 32 channels optical coupling isolation input, including two positive/negative limiting signals every axis Input voltage 5-24V Isolation voltage 2500VDC Switching quantity output: 16 channels collector open circuit output NPN collector open circuit, 5-24VDC, maximum current: 100mA All the input and output signals of 16 channels can be transferred as input siganls and output signals Control mode: Available control modes: constant motion, zeroing motion, multi-axis interpolation, arc interpolation, continuous interpolation, etc. Position management: Use two add-subtract counters; one is the logical position counter for internal management of driving pulse output and the other is actual position counter receiving external pulse input. The input signal is the coder or grating bar inputted by A/B phase, or the input signal of up/down pulse.