Centralized lubrication systems

The oil is fed to the felt rollers from the centre outwards through apertures in the roller carrier spindle. The pressure of the upper roller is applied using tension springs. Specifications Oil viscosity at 40° C: up to 100 mm2/s Max ...

PROTEM Micro-Lubrification System This system of lubrication is designed for carbide tools, HSS or used for the PROTEM machines for cutting and bevelling (ranges TTNG, TTWL, MF and other). This system of micro-lubrication can also be ...

Elevator lubrication with simalube The guide rails on elevators need to be permanently lubricated in order to prevent dry friction. By dispensing precisely the right amount of lubricant, the simalube lubrication system reduces the ...

Lubrication based on operating hours or on impulse perma STAR CONTROL is machine / PLC controlled and can easily be integrated into machines with external power supply. The operating status can be transmitted to the PLC. The lubrication ...

perma PRO LINE is a special multi-point lubrication system for linear guides. Each outlet’s lubricant discharge can be adapted to manufacturer specifications. The PRO LC is available in two sizes (filled with 250 cm³ or 500 cm³of grease) ...

perma ECOSY is a compact multi-point lubrication system specifically developed for the lubrication of chains. It can lubricate up to 6 lubrication points. The discharge amount for each outlet can be set individually and separately from ...

Tapes and plates need to be lubricated to increase the tools’ lifetime. The roller lubricator has two felt rollers which are moistened separately. Through a drilled quill (see schematic) the oil is spread evenly over the entire roller ...

With the support of our partner and tap manufacturer BASS GmbH, we tailor this already proven solution in the machining industry, to our in-die tapping solution. This lubrication solution has some advantages: • Reduce of the lubricant ...

ATS Electro-Lube's vibration activated lubrication systems offer the simplest, most cost-effective solution to industrial lubrication. A built in vibration sensor controls the lubrication unit, by sensing the vibration of industrial ...

The Lubricus lubrication system is an utmost compact lubrication unit for oil and grease up to NLGI class 2. The lubrication system LUB-C operates with external power supply unit (24VDC) and is monitored by the control unit "LUbricus ...

The Lubricus controller is used for external monitoring of the Lubricus, to which up to four Lubricus lubrication systems (4 outlets each = 16) can be connected. A connection to the PLC is possible using the Lubricus Controller. The ...

The Lubricus lubrication system is an utmost compact lubrication unit for oil and grease up to NLGI class 2. The lubrication system operates with external power supply unit (24VDC). Depending on type the Lubricus features up to 4 outlets ...