Resins and gelcoats for composites

MAIN PRODUCT FEATURES ¬ Low initial mixed viscosity ¬ Good cure progression from ambient only cures ¬ Non pigmented Resin and Hardeners ¬ Improved Health and Safety ¬ Optimised for hand lay-up ¬ Excellent fibre wetting ¬ Germanischer ...

MAIN PRODUCT FEATURES ¬ Optimised for open-mould laminating of large structures ¬ Germanischer Lloyd approved ¬ Mix ratio of 100:28 (by weight) AMPREG 22 is an established and widely used laminating system. It is intended for both wet ...

PRIME™ 20LV EPOXY INFUSION SYSTEM Very low viscosity Variable infusion times Very low exotherm even in thick sections Suitable for infusing very large structures Germanischer Lloyds approved PRIME™ 20LV is the next generation ...

MAIN PRODUCT FEATURES ¬ Use for gluing, coatings, laminating and filling ¬ Rapid curing, even at low temperatures ¬ Simple to use APPLICATIONS ¬ Repair of wooden boats, plus other woodworking applications such as cabinet making and ...

MAIN PRODUCT FEATURES ¬ Excellent Clarity ¬ Good ultra-violet resistance ¬ Rapid fibre wet-out INTRODUCTION SP 115 is a low viscosity, ultra-clear epoxy laminating system. It has been designed for the manufacture of laminates which are ...

To respond to all metallographic control and research situations, LAM PLAN developed and tested a range of hot mounting resins which allow obtaining perfectly adapted mountings regardless of the undertaken study. Each mounting resin is ...

Mainly intended for the metallography research sector, the LAM PLAN range of cold mounting resins offers many technical and economic advantages. The cold mounting resins are the solution for samples which do not withstand too high a pressure ...

RS is a solid-state two-component polyurethane resin, usable for all filling and insulating with operating voltages of up to 1 kV. Its excellent insulating properties ensure a watertight seal and excellent mechanical protection. Fluid, ...

RR is a re-entarable two-component polubutadiene resin, usable for all filling and insulating with operating voltages of up to 1 kV. Its excellent insulating properties ensure a watertight seal and excellent corrosion protection. Non-toxic ...

Abbreviation of Resin transfer Molding, RTM is a closed mould technology of low pressure injection. Allowing to reach high production rates, this technology provides one of the most interesting cost/efficiency ratios. Matrasur Composites ...

liquid, aluminium-filled, high-temperature resistant from -35°C up to +220°C High-temperature resistant casting resin system especially for industrial use. This type is non-corroding, anti-magnetic and cures practically without shrinkage. The ...

putty, aluminium-filled, temperature resistant from -35°C up to -35°C bis +120°C Designed for use on aluminium or alloy, magnesium and other light metals. For all kinds of cost saving repairs, also on steel parts. For filling ...

putty, stainless steel filled, non corrosive temperature resistant from -35°C up to +120°C Special high grade, non corrosive putty for various repair and maintenance works on machine parts and stainless steel equipment i.e.: tanks, ...

WEIDLING Plastic Metal C liquid, aluminium-filled, high-temperature resistant from -35°C up to 220°C High-temperature resistant casting resin system especially for industrial use. This type is non-corroding, anti-magnetic and cures ...

Star Technologys armature balancing compounds are used primarily for weight addition balancing of electric motor armatures. We have a solid range of balancing epoxy compounds to choose from for use with automatic and manual balancing ...