Voltage measuring devices

The ROHM voltage detector IC series are reset IC with highly accurate detection voltage of ±1% , low current consumption, small thin packages and wide range of detection voltage. They can be used for every kind of application equipped ...

The Chauvin Arnoux SHT40kV is a hand held high voltage probe. The SHT40kV probe is designed to measure voltages referenced to earth, 40 kVDC or peak and up to 28 kVAC (50/60 Hz) and suitable to be used with any existing multi-meter. ...

Chauvin Arnoux test measurement voltage absence testers (VATs) C.A 740N and C.A 760N check for the absence of voltage in compliance with Edition 2 of the IEC 61243-3 standard workplace legislation on the protection and safety of electrical ...

The HT2055, generally composed of a station and a meter-designed model, is generally designed to perform step-contact voltage measurements on electrical installations involving HV power station (TN system, electrical substation) with ...

The HT20 is a pen voltage detector engineered by HT Instruments. It is constructed in compliance to IEC/EN61010-1 safety standard in CAT IV 1000V. The device detects AC voltage from 100V to 1000V, at an operating frequency rate of ...

The FLIR VP52 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP52 to ...

In just one or two seconds, an operator can find out whether if it is secure to work around regions such as: transformer gear and circuit splitter housings, power ground wires or freshly-driven earth rods transportable dwellings, metal ...

PROFITEST PRIME The first All-in-One Tester for electrical equipment, machinery, industrial machinery, wind turbines and many other fields of applications. Thanks to the wide range of potential applications and versatile test ...

Telescoping Rod for Measurement of PE and RISO, 120 cm. TELEARM is used as a test probe extension. The test probe of the test and measuring instrument is plugged into the connector of the handle by means of the connector coil cable ...

• Clear and unambiguous indication of measured values on TFT display • Easy operation and parameterisation via touchscreen or via CB-Configurator Software • Automatic cyclical scrolling of measured data • Integrated active and reactive ...

• Clear and unambiguous indication of measured values on TFT display • Easy operation and parameterisation via touchscreen or via CB-Configurator Software • Monitoring and analysis of harmonics (U, I) • Integrated active and reactive energy meters

The TensION, manufactured by SimcoIon, is a high-voltage detector which is used to check AC/DC Simco-Ion discharging and charging device. It provides information about the presence of a high voltage on the inosing emitters or charging ...

Voltage: 0 V - 600 V

Voltage: 0 V - 600 V

MPC-5/50 is a GETEST unit that for measuring the voltage differences between ground points, conductive parts or earth. If users notice leakage currents through earth, this item will come in handy. In certain countries, these measurements ...