Optical fibers

This product appoints a monomode optical fiber which has 13 fiber Bragg gratings (standard) and permits measurement of fiber optic strain using a defined gauge factor. The OptiMet-OMF allows bending radii for up to 2.5mm and has a 5nm ...

Plastic fiber optic cables are ideally used for scanning purposes and is based on the principle of through beam. The selection of these cables is made on the basis of the design of the fiber head and the features of the fiber. Some of ...

Glass Fiber Optics by LEUZE are built to withstand even the harshest of working condition. The GF 500/1 LS-MS is designed for through beam operation. With multiple fiber core in a cylindrical design along with brass nickel-plated fiber ...

These Graded Index, Multi mode fibers by Newport has many discounts available when ordering bare optical fibers as per the volume which goes 15% off for 6 to 50 meters, 22% for 51 to 1000 meters and 25% discount when the volume is beyond ...

Together with the j-BendAble OMx brand, we provide bend-insensitive 50 µm multimode fibers, that have been enhanced designed for 850 nm laser transmission. They're within conformity with the actual legitimate OM2, OM3 as well as ...

As part of Select-Cut-Off and polarization maintaining singlemode fibers, these offer a wide wavelength range from UV to IR, and are widely used in current and future applications like data transmission, optical communications, sensorics ...

The optical fiber connects the Mini-Integrating Sphere with the spectrometer, but can be used also without the sphere to collect optical radiation. The fiber transmission allows operation from UV to VIS. Highlights: Multimode fiber ...

Introduction： The PM fiber coil is one of the most significantcomponents of the Fiber Optical Gyroscope (FOG) as well as the Fiber OpticalCurrent Transformer（FOCT）.YOEC uses the Quadruple Method to wind the FOG ...

Introduction： PCF,also known as holey fiber or microstructure fiber, normally consists of aregular pattern of air holes or doped materials inside pure silica backgroundalong the transverse direction. According to the mechanism of light ...

Ytterbium double clad fibers from NKT Photonics have the largest single-mode cores in the market. This feature allows amplification to unpresendented power levels while retaining quality and proper stabilization. These units are made ...

The aeroGAIN-ROD is designed specifically for the super-fast fiber laser market. It plays a role in the new generation of ytterbium gain fibers. The typical amount of output power of fiber lasers has been limited to a few watts due to ...

Angle:custom size(30°~120°)±1°,丨R:7~8um，丨AR Coating Applications Couplings of various type of laser device Features Spherical lens Excellent coupling efficiency Low loss High precision

Angle:（50°~120°）or custom size±2°丨R:4.5~15μm(STD)丨AR Coating Applications Fiber optical Coupling of LD chips with elongated light spot and cylinder lens can have good mode field match with the above chips to got excellent coupling efficiency ...

Angle：（30°~120°）±2°丨working distance：superior to 20μm Applications Couplings for the laser device with low NA ,long working distance. Features Fusion section is graded index fiber Spherical lens Long distance working

Angle：90°±1°（STD）丨chamfer：5~15μm丨AR coating Applications Couplings of laser to optical fiber and optical fiber to detector. Features The optical performance is superior to cross-cutting surface. The end chamfer is easy for assembly.