1. Home
  2. Machine-tools
  3. Machine Tool Accessories
  4. Lathe manual chucks
  5. manual tightening chuck / 3-jaw / 6-jaw / through-hole
Manual Tightening Chuck / 3-jaw / 6-jaw / Through-hole

manual tightening chuck / 3-jaw / 6-jaw / through-hole

3 ZAS series

INO Group

manual tightening chuck / 3-jaw / 6-jaw / through-hole
Request for quotation
captcha contact product

  • Clamping method:

    manual tightening

  • Number of jaws:

    3-jaw, 6-jaw

  • Other characteristics:

    through-hole

  • Diameter:

    Min.: 160 mm

    Max.: 600 mm

  • Length:

    48.5 mm, 67 mm, 88.3 mm

- Aluminium body with surface protection thanks to Altef® coating (approx. 50 HRC) with a high degree of wear protection
- Diameter: 160 / 240 / 315
- Special chuck sizes: 125 / 400 / 600
- For 3-371 mm shank diameters and 40-404 mm bore diameters
- Including 1 set of reversible steel top jaws (case-hardened and ground)

Go to the Maprox GmbH website for more information
Products relative
Angle heads
fixed angle head / compact / 90° / for machining units

fixed angle head / compact / 90° / for machining units

AG90
Rotational speed: 0 rpm - 6000 rpm
adjustable angle head / milling / cutting

adjustable angle head / milling / cutting

0° - 30° | AGU30
Rotational speed: 0 rpm - 6000 rpm
adjustable angle head / for machining units

adjustable angle head / for machining units

AGU
Rotational speed: 6000, 4000 rpm
adjustable aggregate head / for machining units

adjustable aggregate head / for machining units

Right Angle Head for Electrospindles
The HSD is made for the Wood Line electrospindles. This allows a wide range of machining operations to be used such as milling, boring and cutting. The HSK and ISO aggregates are made of Avional aluminum. It gives a structural solidity ...
angle milling head

angle milling head

Right Angle Head for Electrospindles
2 ER 25 COLLET OUTLETS - WITH 360° ROTATION ON C AXIS (ISO 30) TECHNICAL SPECIFICATIONS Electrospindle rotation speed: 12.000 RPM max Tool rotation speed: 12.000 RPM max Speed ratio: 1:1 Electrospindle coupling: ISO 30 Tool shank diameter: ...
90° angle head / milling

90° angle head / milling

AG90
Rotational speed: 0 rpm - 6000 rpm
adjustable angle head / milling

adjustable angle head / milling

AGU90
Rotational speed: 4000, 6000 rpm
90° angle head / small-bore

90° angle head / small-bore

AG90
Rotational speed: 0 rpm - 2000 rpm
Partners
partner 6
partner 7
partner 1
partner 2
partner 3
partner 4
partner 5
partner 8
partner 9