lubrication oil / synthetic / for gearing / industrial

gear oil

Additional Information

Fully synthetic high performance gear oil with selected EPL additive system


Use

Especially for lubrication of highly loaded spur gears, bevel gears and worm gears, even at low run-up temperatures.
Particularly suited for industrial gears under heaviest operating conditions.
Like dynamically changing loads, high temperatures, vibrations, shock loads and oscillations, to prevent surface fatigue, abrasive wear and micropitting and to extend oil change intervals compared to mineral oils.
Applicable for lubrication of oil-lubricated rolling and plain bearings, highly loaded sliding surfaces, circulating systems etc.
Typical applications: heated equipment such as extruders, calenders, kneaders, mills, conveyors, cranes, hoists in chemical industry, mining, cement, plastic and steel industry.


Properties

Outstanding wear protection by EPL additive system
Lowers the coefficient of friction and power losses and reduces the oil sump temperature
High scuffing load capacity even at low circumferential speeds and mixed friction
Especially suitable for safe lubrication in the boundary and mixed friction
Excellent oxidation and ageing stability, thus significantly longer service life than mineral Oils
Permits longer oil change intervals by lower strain
Free from solids and silicone
Meets the requirements of the specifications DIN 51517-3 and ISO 12925-1


Temperature range: - 30°C - + 120°C

Shipping containers

20l can
200l drum