Ball Bearing / Double-row / Stainless Steel / Custom

ball bearing / double-row / stainless steel / custom

xiros® B180 series

ball bearing / double-row / stainless steel / custom

Request for quotation

Rolling element:

ball
Geometry:

double-row
Material:

stainless steel

Other characteristics:

custom
Applications:

packaging machine, for conveyors
Inside diameter:

42 mm

Outside diameter:

20 mm

Xirodur® B180 polymer ball bearing is used mainly on conveyor machines, packaging plants and custom machine fabrication applications. B180 bearing has a double row structural architecture, extending system's workload capacity within a reasonable amount of time. It has an upgraded lubrication routine with non-magnetic and corrosion resistant attributes for longer utilization. It can tolerate temperature reading from -50 to up to +80 degrees Celsius and requires no maintenance thus, generating higher cost-effectiveness. Its size is configured to a wider dimension with equally enhance material components. The bearing is enclosed within a PA cage and incorporates glass or stainless steel balls.

View catalogue Go to the igus® website for more information

Products relative

Ball bearings

ball bearing / thin-section / deep groove / steel

ball bearing / thin-section / deep groove / steel

Inside diameter: 3 mm - 160 mm
Outside diameter: 7 mm - 250 mm

ball bearing / radial / polymer / stainless steel

ball bearing / radial / polymer / stainless steel

Inside diameter: 2 in
Outside diameter: 0.5 in

ball bearing / single-row / urethane / light-duty

ball bearing / single-row / urethane / light-duty

NF, RIF, RF series

ball bearing / double-row / steel / precision

ball bearing / double-row / steel / precision

MM, MMV, MMX, HX series

Inside diameter: 30 mm - 100 mm
Outside diameter: 55 mm - 180 mm
Width: 13 mm - 28 mm

ball bearing / cylindrical roller / single-row / axial

ball bearing / cylindrical roller / single-row / axial

N, RIN, RN series

Outside diameter: 80 mm - 2000 mm

ball bearing / cylindrical roller / single-row / radial

ball bearing / cylindrical roller / single-row / radial

Outside diameter: 80 mm - 2000 mm

ball bearing / angular-contact / high-speed / high-precision

ball bearing / angular-contact / high-speed / high-precision

... Bearings also operate under high acceleration conditions. note: dn = bearing bore diameter in mm x rotational speed in rpm. dmn = bearing ball PCD in mm x ...

ball bearing / single-row / spindle

ball bearing / single-row / spindle

Inside diameter: 240, 10 mm

Roller bearings

spherical roller bearing / single-row

spherical roller bearing / single-row

NP, RIT, RT series

Inside diameter: 35 mm
Outside diameter: 80, 72 mm

cylindrical roller bearing / single-row / axial / radial

cylindrical roller bearing / single-row / axial / radial

Outside diameter: 80 mm - 2000 mm

ball bearing / cylindrical roller / single-row / axial

ball bearing / cylindrical roller / single-row / axial

N, RIN, RN series

Outside diameter: 80 mm - 2000 mm

ball bearing / cylindrical roller / single-row / radial

ball bearing / cylindrical roller / single-row / radial

Outside diameter: 80 mm - 2000 mm

roller bearing / axial / radial / stainless steel

roller bearing / axial / radial / stainless steel

NP, RIT, RT series

Winkel bearings are designed for linear applications with a combined high radial and axial load. Lubricated linear bearings providing long service intervals. Reduced design time and component cost. High specification ‘U’ or ‘I’ beam ...

spherical roller bearing / double-row

spherical roller bearing / double-row

Inside diameter: 35 mm
Outside diameter: 72 mm

cylindrical roller bearing / radial / with cage

cylindrical roller bearing / radial / with cage

Inside diameter: 15, 710 mm

cylindrical roller bearing / single-row / low-friction

cylindrical roller bearing / single-row / low-friction

Inside diameter: 15 mm
Outside diameter: 710 mm

Needle bearings

needle cage

needle cage

ID : 3 - 110 mm, OD : 5 - 117 mm

Schaeffler needle roller and cage assemblies are single or double row units that include cages and needle rollers. The radial section of the assemblies is smaller than the diameter of the needle rollers. This enables the needle roller ...

drawn cup needle roller bearing

drawn cup needle roller bearing

ID : 3 - 210 mm, OD : 6.5 - 240 mm

Drawn cup needle roller bearings with a closed end open ends are components containing thin-walled drawn external rings and needle roller and lock in assemblies. Drawn cup need roller bearings with open ends come with complete complement ...

needle bearing / double-row / with ribs

needle bearing / double-row / with ribs

ID : 3 - 210 mm, OD : 6.5 - 240 mm

Inside diameter: 415, 5 mm

needle bearing / double-row

needle bearing / double-row

ID : 3 - 210 mm, OD : 6.5 - 240 mm

Inside diameter: 5, 415 mm

needle bearing / single-row / self-aligning

needle bearing / single-row / self-aligning

ID : 3 - 210 mm, OD : 6.5 - 240 mm

Inside diameter: 45, 12 mm

needle bearing / radial / steel / machined-ring

needle bearing / radial / steel / machined-ring

ID : 3 - 210 mm, OD : 6.5 - 240 mm

Inside diameter: 1200 mm

roller bearing / needle / radial / steel

roller bearing / needle / radial / steel

ID : 3 - 210 mm, OD : 6.5 - 240 mm

Since a needle bearing can only support pure radial or axial loads, it is necessary, when both radial and axial forces are present, to combine one needle bearing with one thrust needle or roller bearing, or in some cases even a thrust ...

automobile wheel bearing kit

automobile wheel bearing kit

MileMate™, 454 series

Timken® MileMate™ Matched Wheel Bearing Sets are the original wheel bearing sets that are designed with the purpose of keeping trucks moving. Our 44 cup and cone sets are designed in such a way that they give superior results with reduced ...

Partners