Differential pressure flow meters

Process pressure: 2 bar - 25 bar
Process temperature: -40 °C - 80 °C
Volumetric flow rate: 2 l/h - 100 l/h

Process pressure: 2 bar - 25 bar
Process temperature: -40 °C - 80 °C
Volumetric flow rate: 5 l/h - 250 l/h

Process pressure: 0 bar - 315 bar
Process temperature: -60 °C - 575 °C

The FLC-FN series from WIKA is a set of flow and venturi nozzles that are specially made to measure liquid, steam and gas flow. This nozzle has an accuracy rate of ≤ ±0.1 % with a 0.1% measurement repeatability ratio. It guarantees minimal ...

The FLC series, which is manufactured by Wika, is a venturi tube that is ideal for use in measuring the flow of fluids, gas, and steam in applications such as oil production and refining, and in the chemical and petrochemical industry. ...

Pressure: 16 bar - 40 bar
Nominal diameter: 15 mm - 250 mm

Process pressure: 0 bar - 50 bar
Process temperature: -40 °C - 100 °C

Spirax Sarco has designed a closed loop control for general-purpose monitoring applications. The orifice plates deliver the highest performing flow-meters which arrive assembled, calibrated, and pressure tested. The plates are a competitive ...

These airflow measuring blades are for use with air conditioning systems, vacuum cleaning systems, laboratory air supply systems, air flow test rigs, fume extraction and exhaust systems. These DEBIMO measuring blades from KIMO are a cost-effective, ...

Two versions are supplied by Orimaster, one for volumetric flow and one for mass flow. It has an integrated DP flow measurement system that combines primary element with DP transmitter in a single flow meter assembly. The one piece flow ...

Pressure: 50 Pa - 6000 Pa

• Designed according to DIN EN ISO 5167-4 • undisturbed straight pipeline • Designed for liquids, gases or light fibres • very low deposition danger - suitable for transporting light fibres • 2 x8 pressure taps guarantee highest accuracy • very ...

The venturi nozzle is made with an inlet profile as per ISA according to DIN EN ISO 5167. The flow which is important and favorable for metering is achieved through the specific deformation process of the thermoplastic material. It allows ...

The venturi tube MVR/FVR is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube has been especially designed for air flow metering in ventilation channels. ...

Process pressure: 7000, 2500 Pa
Process temperature: -10 °C - 50 °C
Volumetric flow rate: 0 m³/h - 200000 m³/h