High-shear mixers, dispersers

The ULTRA-TURRAX®, manufactured by Ika, is a tube drive workstation that is composed of 1 x ST-20, 1 x DT-20 including 1 removal hook for removal the rotor-stator unit, 2 x BMT-20 G / S and a power supply. The sample containers (tubes) ...

The High Shear In-Line Mixers from Silverson are elf-pumping, aeration-free mixers that have the capacity to reach up to 3600 rpm. Designed to handle interchangeable workheads, this maintenance-friendly machine efficiently dissolves solids ...

Flashblend from Silverson is a machine capable of rapidly mixing different kinds of powder, even problemaitc ones such as gums and thickeners. It is made to continuously and homogenously blend at the rate of 15,000 kg/hour. The Flashblend ...

The new Silverson Flashmix takes a revolutionary approach to powder/liquid mixing. Unlike many powder/liquid mixers, which use vacuum to pull in powders, the Flashmix literally forces powder into the liquid stream. This not only allows ...

The Aero M dry powder disperser enables bulk dry powder samples to be measured using the Mastersizer 3000E laser diffraction particle size analyzer. Its simple design ensures that it is easy to use and maintain, delivering robust, reproducible ...

A unique dip-in wet sample dispersion unit that can be used with standard laboratory glassware. Suitable for a wide variety of dispersant volumes and particle size ranges. The Hydro EV has a unique dip-in centrifugal pump and stirrer ...

The Hydro LV is an automated large volume unit that controls wet dispersion of materials for particle size analysis. It is especially suitable for applications where the sample size is relatively large or the size distribution is very ...

Successful dispersion requires targeted force so as to separate agglomerated particles. With the Omega® Economic Disperser, one is able to apply dispersive forces then and there, in locations where they are most effective. In the Omega® ...

The Ψ-Mix® inline disperser wets the solid components on a large surface of liquid as part of the new dispersion method. This is going to be an emission and dust free operation. The vacuum dispersion, shearing and also the pressure wetting ...

The PMD / PMD-VC Series of Vacuum Disperser, manufactured by NETZSCH Grinding and Dispersing, is specifically designed as intensive mixer. This device is made as stationary mixing and dispersing unit used for processing large batches. Moreover, ...

Featuring a precision high-speed rotor, which creates a vigorous pumping action as it draws liquid into the stator inlet. Liquid is discharged at high velocity through machined slots in the stator. This results in a powerful combination ...

Introduction: SK500 series mixers are high performance agitators for extended lifetime, reduced maintenance and operating costs, This kind of mixer is specially designed for the application of sealed vessel mixing. Features: 1.C-Face ...

Introduction: SK600 series mixers are designed to provide reliable service in the largest, most demanding applications, from pharmaceutical fermentation and large-scale chemical processing to minerals processing and heavy sludge waste ...

Introduction: High shear dispersing and emulsifying is often required when efficiently,rapidly and uniformly distribute one or several phases into another continuous phase,while normally these phases are immiscible. Work Principle: The ...

The application The falling chute is especially suitable for the measurement of agglomerates of dry powders or for determining the particle size distributions of free-flowing, coarse-grained materials which you would like to measure without ...