Humidity sensors, transmitters

Omega introduces the RHCM-40 Series dew point transmitter ,it is an optical chilled mirror high performance hygrometer designed to continuously measure the moisture content in gases. The sensor provides accurate long term repeatability ...

Wall, Duct and Pipe Mount Models Remote Type Models 4-Wire RTD Measurement for Dew Point ±0.2°C Accuracy for Both Dew Point and Temperature Long-Term Stability and Repeatability RS232, Bi-Directional, Serial Output Electronics Housed ...

The RH-USB can connect directly to the USB port of a computer. It comes with free software that can convert a PC to a chart recorder, data logger or temperature and humidity meter. It is accurate to a ±1°C (±1.8°F) in temperature and ...

The RHCN-7000 Series on/off controller offers humidifying or de-humidifying control. The 3 digit, bright green LED display show relative humidity, output status, and error readings. Setpoint, hysteresis, probe adjustment and control type ...

A wall mount sensor that is designed by Omega which suits well in an office area, computer room to a laboratory decor. It is economical by its low cost miniature design and is efficient for long time usage. GBP 33.50 is one of thermocouple/thermistor ...

Relative humidity sensor, 4... 20 mA output Capacitive humidity sensor Dimensions 80 x 80 mm, depth 52 mm Enclosure protection class IP 65 Wall mounting Connections with screw terminals 2.5 mm² Measuring range: ...

Relative humidity sensor, 4... 20 mA output Capacitive-digital humidity sensor with dimensions: Ø 20 mm x 185 mm Enclosure protection class IP 65 Wall mounting Measuring range: 5 ... 95% RH (4.8 ... 19.2 mA) Total ...

Relative humidity + temperature sensor, 4... 20 mA output Capacitive-digital humidity sensor Thermistor-digital temperature sensor Dimensions: Ø 20 mm x 185 mm Enclosure protection class IP 65 Wall mounting Humidity ...

Electronic humidity and temperature transmitter - Wall, duct mount or remote sensor relative humidity electronic transmitter. - With replaceable "Humy-chip" capacitive sensor and filters - Voltage, Current or PT100 output according ...

Wireless probe with external humidity sensor 2%RH, wireless frequency 2.4 GHz Key Features: External, permanently connected capacitive humidity sensor with high precision, quick response time and good long-term stability Flexible ...

The testo Saveris H3 D radio probe is equipped with an internal humidity and temperature probe and is therefore ideal for monitoring warehouse goods that are sensitive to temperature and humidity. It also monitors the air conditioning ...

testo 6681 industrial humidity/temperature transmitter, accuracy up to ±1.0 %RH (depends on the probe), selectable signal outputs, optional display, optional ethernet or profibus module, output of all relevant humidity parameters, optional ...

testo 6651 humidity/temperature transmitter for critical climate, accuracy up to ±1.7 %RH (depends on the probe), selectable signal outputs, optional display, optional ethernet module, optional relay, 2 analog outputs Key Features: ...

The Combined Temperature and Oil Moisture Sensor (by IFM) is an advanced, high-quality level sensor which guarantees oil dryness. It features dual analogue outputs (4-20 mA), ideal for both relative temperature and humidity), a broad ...

HUMITOP is a relative humidity sensor that is ideal for ambient measurements as well as quantification in ducts and chambers. It features a rapid and straightforward installation with no accompanying transducers, a temperature range from ...