Lathe centers, tailstock

The FRUN 1 series of Steady rests from Kitagawa is designed with a 30d cylinder bore. The unit is engineered to handle pressures from 6 up to 50 bar and to provide a 1 kilonewton maximum clamp force. The 10 kilogram product is designed ...

The MT 2, MT 3, and MT 4 Models are revolving lathe centers developed by Knuth. They are built with hardened and ground tool steel constructions. These units are supplied with 7 replaceable centers, and 32.2 mm maximum mushroom diameters. ...

Properties and application: Made of high-quality alloy steel Hardness: 58-62 HRC Nose angle: 60° Accuracy: 0,01 mm

Properties and application: Made of high-quality alloy steel Hardness: 58-62 HRC Accuracy: 0,01 mm Nose angle: 60°

Properties and application: Made of high-quality alloy steel Hardness: 58-62 HRC Accuracy: 0,01 mm Nose angle: 60°

Properties and application: Made of high-quality alloy steel Hardness: 58-62 HRC Accuracy: 0,01 mm Nose angle: 60°

Properties and application: Increased length of the nose allows access of a turning tool to the face of a workpiece Recommended for turning and grinding works Made of high-quality alloy steel Working surface hardness: 55-60 HRC

This conventional lathes tail stock is developed by BZT Maschinenbau GmbH. It is equipped with 4 axis bearings. In addition, this tail stock comes with a tail stock with a height that can be adjusted. The center high of this tail stock ...

Shaped tailstock with precision bearings, recommended for lathes with medium-load machinings and not high speeds. Hardened and rectified body and shaft, permanently lubricated with special grease.

Shaped tailstock with normal bearings, recommended for lathes with medium load machinings and not high speeds. Hardened and rectified body and shaft, permanently lubricated.

Shaped tailstock with precision bearings, recommended for lathes with heavy-load machinings and not high speeds. Hardened and rectified body and shaft, permanently lubricated with special grease.