Road construction equipment

Working width: 2.5 m - 10 m

Working width: 8 m - 12 m

Sany SCM200-3 cold planer adopting the mechanical belt drive realizing the construction efficiency that is over 1.3 times higher than the hydraulic drive and about twice higher than the chain drive; The 200hp cold planer adopting ...

Working width: 800 mm - 1300 mm

Working width: 1400 mm - 2730 mm

Working width: 2 m

Working width: 2.5 m

Working width: 2.5 m

The XCMG XZJ5250GL is an asphalt distributor that can deliver optimum performance in constructing permeable layer, under-layer seal, and cohesive layer. This can also be utilized in constructing fog seals for each grade of asphalt highway. ...

The XLZ210 pavement cold recycling machine, manufactured by XCMG, is ideally used for the onsite stabilized soil mixing functions for sub-grades and sub-bases of highways, urban roads, airports, ports and parking lots. Its Weichai WP12N ...

FOR BEAD OR SWIRL APPLICATIONS They can be used in manual applications where the compressed air necessary for piston equipment is not available. Dispensing is controlled by a trigger system on the actual applicator. WITH THE POSSIBILITYOF ...

Street Milling Machine FS series, with the purpose of dismantling the asphalt of road surface, of concrete in the street squares, and scraping the rock or just create a crossing or a track where surface is paved. It is produced in 9 models ...

The twistip can be attached to an M 24 or M 28 truck-mounted concrete pump. Similarly to the Tunnel-PUMA, it then allows the end hose to perform axial slewing movements in order to access holes in the side of the formwork inside the tunnel.

Tank volume : 17 m³. Binder fed into the tank by two worm screws Ø 460 mm. Rabaud technologie since 25 years. Variable spreading width : 0.62cm to 2.48 m with 15 different spreading combinations. Stainless cellular rotor Ø 495 mm Patented. Spreading ...