Sleeves

Bushing Type :Plate Nominal Inside Diameter :5.0 mm Outside Diameter :6.2 mm Overall Length :3.6 mm Actual Inside Diameter :5.0 mm Shoulder Outside Diameter :8.0 mm Material :Nylon

The Press Fit Slotted Locator Bushing are specifically designed to be used in aligning two holes with the use of L-pins without binding. This reliable, price-competitive product by Jergens features a roll pin, a bore bushing hole for ...

O-Z/Gedney are specification grade-insulated bushings, which help protect insulated conductors from factors such as abrasion or mechanical vibration, especially during pulling. In addition to this, a voltage gradient is provided between ...

The Timken offers precision stainless steel wear sleeves designed to be pressed onto a shaft to provide an enhancement of the sealing surface. The Redi-Sleeves are quick, and a cost-effective solution for grooved and worn shafts. The ...

Accessories include flanges, fastening hardware, earthing cables, hose connections and hoses or compensators as well as other system component accessories. Functional, easy to use, and a perfect fit from our modular system.

Connection Tubes Tube and fittings in general. Temperatures Minimum Temperature: -110 °C Maximum temperature: +300 °C These temperatures apply to the equipment without o-ring. For accessories with o-ring see temperature values directly ...

Dimensions d12/16-1/4“ – d110-4“ 16 Pressure rates PN16 Connections solvent socket – male thread Certificates EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

In conjunction with Union Nuts, Support Sleeves for 37° Flared Tube Fittings of the FI-BH series are used to secure the tapered end of a 37° flared tube to the also tapered cone adaptor Available in the Light and Heavy Series according ...

Support Sleeves of the FI-VH series are highly recommended and in some cases generally required to support thin-walled steel and stainless steel tubes as well as tubes made of non-ferrous metals (such as copper, brass, aluminium etc.) ...

The 1/4'' connector is a socket gear that is designed with quarter national pipe thread on both ends.

A standard type and a seal type are available. In addition, each of both is divided into light-load and medium-load types.

Operational safety is 1.5 times the stated pressure, Bold type = short thread (see picture above)

GF-101 to DIN 2986, with parallel BSP thread to DIN EN 10226

GF-103Rp to parallel BSP thread to DIN EN 10226 we reserve the right to alter dimensions with 1.4301 - 2i