Other flow meters

The BTU meter RH33 is used in applications with liquid energy carriers.It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated ...

Displays Instantaneous and Total Flow Digital RS232 or RS485 Interface (Multi-Drop Up to 64 Devices) Programmable, Optically- Isolated Pulse and Digital Outputs For Use with FMA1700/1800 or FMA5400/5500 Series 16 Point Programmable ...

This cutting edge flow indicator is completely built out of cast iron. It consists of connection flanges that are embellished and drilled according to the specifications of EN 1092-2 PN16 . It features a specifically built raised face ...

Mival flow indicators are devices that can be assembled inside pipelines. The pipelines should be cleaned for removing the impurities in them before installing the flow indicators so that the effective functionality of the device can ...

Before to assemble the flow indicator at the pipeline check inside the body and the threaded parts to be clean, possible impurities have to be removed in order to ensure a right functioning. If compressed air is at your disposal, use ...

This is RotorFlow® in its most basic form a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or simply confirmed, by viewing the speed of the turning rotor. Either port may be used for ...

The PVD made by Hydac is a differential pressure indicator made completely out of stainless steel. It contains an optimal differential pressure of 420 bar along with typical response pressures of 2 / 5 / 8 bar. It has numerous versions ...

The new transmitter has been developed for accurate flow measurement in open channels, part full and full pipes, and surface water bodies and is compliant with both ISO 6416 & IEC 60041. To meet the highest possible accuracy requirements ...

Two Flow Totalizers in One! Aalborg®'s TIO Totalizer converts analog Mass Flow Meters and Controllers into precision digital units via RS 232 or RS 485 interfaces (multi-drop capacity up to 64 devices). This product can be used as a ...

Flow Indicator with Rotor DAR Connection: G ¼...G 2 female; ¼..2 NPT flange DN 15... DN 200 Material: grey cast iron; cast steel; st. st. Rotor: plastic or PTFE Max. pressure: PN 40 Max. temperature: 260 °C (with PTFE-rotor)

Flow Indicator w. Rotor and Self-cleaning mech. DAA Indicating range: 0,4 - 4 L/min ... 8 - 100 L/min water Connection: G ¼...G1 ½ female, ¼...1 ½ NPT Material: brass, st. st. Max. pressure: 16 bar Max. temperature: 100 °C Viscosity: 1 - 150 mm²/s

Flow Indicator with Ball DKB Indicating range: 0,05-15 L/min...0,18-105 L/min water Connection:G 1/8...G 1 (G1 1/2) female, 1/8...1 NPT female Material: brass, ball: POM or PTFE st.steel, ball : PTFE Max. pressure: 6 bar / 16 bar Max. ...

CFV... - Propeller Flow Indicator SE The CFV propeller flow indicators are generally used to monitor the correct flowing and circulation of a fluid into a pipeline. They are ideal for cooling and heating circuits, lubrication plants, ...

The IFV Series, manufactured by Elettrotec, is a visual flow indicator equipped with a pirex glass tube and vertical mounting. It has a maximum pressure capacity of 15 bar, operating temperature that ranges from -10°C up to +100°C, and ...

The ML211 Electromagnetic Flow Meter Converter is specifically designed to provide an extremely high quality performance for very specific purposes and applications. The converter is a counter system which has the ability to keep the ...