Stepper motor controllers

The Precision Ring Drive (PRD) is a part of the precision rotary motion series which is made up of precision-grade bearing and gearhead, along with the Roller Pinion System (RPS) technology of Nexen. This product works with minimized ...

Specifications : Bipolar (BS1) & Unipolar (US1) models Input voltage : 24/36 VDC (+/-10%) Current per phase : from 0.5 to 2A per phase Operating mode : pulse & direction or CW/CCW UL/CSA/CE certified Main Features : ...

Input voltage : Single phase 100 to 120VAC +10,-15%, 50/60Hz Single phase 200 to 240VAC +10,-15%, 50/60Hz Features: -* Low vibration This driver features approximately 30% less vibration compared with our conventional product. -* ...

MAIN FEATURES - Power Voltage DC24V / 48V - High-Speed Field-Bus EtherCAT Interface Based on the widely used 100BASE-TX cabling system and with a baud rate of 100Mbps full-duplex, EtherCAT enables high speed and high reliable communication. - ...

The ST 011 is equipped with a frequency output for controlling a stepper or servo motor power component (RS422). The drives can be controlled or regulated. For the regulated mode, an incremental encoder interface with ABR analysis and ...

The VST 012 from sigmatek is a VARAN module manufactured for controlling 2-phase stepper motors with voltages up to 70 V, and a continuous current of 10 A. Its compact, IP 20 rated housing that measures 28 x 151 x 123 mm and compliance ...

The Automation 3200-OEM/Nservo-OEM Control Card from AEROTECH, completes motion capabilities like velocity profiling, trajectory modification, and fast input-output. It is configurable in native RS-274, C, .NET, IEC61131, AeroBASIC, or ...

Input voltage: 5 V - 24 V
Output voltage: 5 V

The C-663 Mercury Step Controller from PIEZO provides services with multi-axis control through 16 mercury class controllers that can be handled by a computer at a time. It has a versatile and cost-efficient automation option that can ...

The CM10 is a controller module that can be added onto a driver. This will create a special integrated controller on the driver. It may be added to serial ports and only takes a moment to install as it can be placed directly onto the ...

The MD 24 / 28 series is a Microstepping driver with maximum 50 VDC. It uses modules that are micro-step capable and uses a copper technology on its motor currents and identical motors that delivers high speed and torques comparable ...

The IT 116 is a flas step controller has a 32-bit RISC processor with Flash memory for user program. It has an final output stages first is step resolution and motor current adjustable via variable DIP switch and second an automatic current ...

The iMC-S8 is a freely programmable compact controller from Isel that is ideal for near or circular axes with 2-phase step motors. The device combines the essential units including power supply, safety circuit, power electronics, core ...

Input voltage: 50 V - 80 V
Current: 4.2 A - 7.8 A

Input voltage: 115, 230 V
Current: 4.2 A
Output voltage: 48 V