-
Technology:
turbine
-
Fluid:
for liquids, for water, for oil
-
Mounting:
flange-mount
-
Material:
stainless steel, PTFE
-
Other characteristics:
with display
-
Protection level:
IP65
-
Domain:
industrial
-
Process pressure:
Min.: 0 Pa (0 psi)
Max.: 16 bar (232.06 psi)
-
Process temperature:
Min.: -20 °C (-4 °F)
Max.: 150 °C (302 °F)
-
Volumetric flow rate:
Min.: 0 m³/h (0 ft³/h)
Max.: 400 l/min (105.67 us gal/min)
Measuring principle turbine
Measuring ranges up to 400 l/min
Output signal Frequency, Analogue 4÷20 mA, Display
Process connection from DN 25 to DN 50
Materials Stainless steel, PTFE, FKM
Temperature up to 150°C - Pressure max 16 bar
HM-TRI turbine flow meters serve to accurate measurement of continuous and discontinuous flow rate values. This turbine flow meter is most suited for liquids with low and middle viscosity, such as for example water, emulsions, mixtures containing glycol and light oils. The large range of different pipe connections and structural sizes allows using these flow meters in various applications and in various industrial sectors.
Applications:
• Tap and demineralised water
• Fuels
• Liquefied gases
• Pharmaceutical liquids
• Fuel oil
• Solvents
Features:
• Short response time (> 50 ms)
• Dynamic measuring system
• Different internal nominal diameters
• Non-threaded pipe connections
• Pressure: as for DIN 32 676
• Design without dead space
• Slide bearing of PTFE with possibility of flushing