needle valve / flow-control / stainless steel / brass

These needle-type flow control valves act as unidirectional and bidirectional controllers. The valves are installed in any position and mounted by male thread.

The valve body and adjusting screw is of stainless steel (M5); brass banjo collet (G1/8 - G1/4 - G3/8 ports) and insert clamp; controller and ports also have brass and technopolymer, while the seals are NBR

Nominal diameter measures M5 = 1.5 mm, G1/8 = 2 mm, G1/4 = 4 mm, G3/8 = 7 mm. It operates on filtered air at 0°C-60°C (with dry air -20°C) at pressures from 1-10 bar operating pressure and 6 bar nominal pressure.