Liquid analyzers: disinfection (chlorine, ozone...)

The ACP 401-2/CL2 series, manufactured by Chemitec, is a multiparameter power unit for the determination of free chlorine with photometric method and temperature. It has an accuracy of 1% f.s. and a resolution of 0.01ppm. Furthermore, ...

The process-photometer Testomat 2000® CLT is a wet-chemical online instrument for monitoring the content of total chlorine (CLT) in the 0–2.5 mg/l (ppm) range. Application monitoring of chlorination systems for drinking water/swimming ...

Features: Microprocessor based for fast and accurate measurements. Large LCD displays pH and Temperature simultaneously. EPA approved DPD method. Automatic Temperature Compensation (ATC) MAX/MIN mode and reading ...

Features: Microprocessor based for fast and accurate measurements. EPA approved DPD method. Large LCD 45 x 25 mm display for reading convenient. Memory function stores and recalls up to 150 points. Low battery alarm and auto shut off ...

Membrane polarographic cell Low influence structure for combined residual chlorine No optional reagent required Continuous monitoring with high stability

The Compact ClO2+ meter provides field analysis of chlorine and chlorine dioxide using the DPD method. The original Palin system was designed for monitoring of all forms of chlorine. Dr Palin extended the method to measure alternative ...

The Compact Chlorometer is ideal for the field professional validating the safety of drinking water or wastewater disinfection: True chlorine calibration – results are calibrated against real chlorine samples for the most accurate ...

The TCA-220 provides continuous ppm total chlorine Analysis without the use of reagents or complex sample systems to control the pH of the sample for analysis. Total chlorine, or the combined amount of free chlorine, chloramine, organic ...

The LXT-220-CLO2 provides continuous ppm chlorine dioxide analysis from 0.05ppm to 20ppm with temperature and flow compensation integrated into the design. Chlorine dioxide's high water solubility enables it to be detected in an aqueous ...

This device is ideally used for applications that are concerned with monitoring the levels of active chlorine and total free chlorine in manufacturing plants for potable water and potable water distribution networks. It is designed with ...

Implements the DPD colorimetric method to determine chlorine concentration One point calibration of photometric cell Control time cycles adjustable between 3 to 90 minutes Proportional control of chlorine concentration Out of range measurement ...

* 0 to 5 mg/L range, dual, fully-adjustable set-point alarms * IP62 enclosure rating, suitable for indoor installation * Automatic, self-testing diagnostics * Minimal routine maintenance required * Colorimetric DPD chemistry - fast, ...

The CLF10 sc analyzer uses Hach's exclusive self diagnostics to alert users when the process has changed or the instrument needs servicing. Diagnostic features include the Cal Watch algorithm for warning of pH and chlorine calibration ...