Pneumatic conveying: pumps, valves, piping...

Special advantages: Streamlined, smooth passage with minimum directional change of product Particularly advantageous for fatty products Prevents the formation of deposits of heat-sensitive products Hose switch can be used at pressures ...

Special advantages: The low product speed achieves a dense conveying phase with very little product segregation. This also means the conveyed product is handled very gently, with very little attrition, and therefore extremely low wear ...

This AZO PPV type of conveyor is specifically engineered to be utilized in food production, plastics, chemicals and pharmaceuticals industry. This conveyor has a switch that provides the vacuum nozzle with compressed air to generate ...

The High Performance Divert (HPD) is used for diverting unit loads, preferably with smooth bottom surfaces, at different angles onto a lateral track to the right or to the left. The HPD is available in two drive variants: One HPD module ...

The Line Vac by Exair is a compressed air-operated unit, connected to a standard hose, pipe or tube to create an ideal in-line conveyor. The unit can be designed to retrofit the current machinery. It is manufactured with particular ...

This is an air conveyor screw manufactured by Exair Corporation which is designed to convert ordinary pipe into powerful conveying system. It can be suitably used for parts, scrap, trim and other rigid components. Using this, it enables ...

EXAIRs Heavy Duty Threaded Line Vac™ Conveyors transforms the ordinary pipe into powerful conveying system capable of handling bulk materials including steel shot, metal parts, scrap, and trim. The device with its rugged and hardened ...

EXAIR’s new aluminum 3/8 NPT and 1/2 NPT Threaded Line Vac™ Air Operated Conveyors convert ordinary pipe into a powerful conveying system for parts, scrap, trim and other bulk materials. Their small size makes them perfect for fitting ...

RV and RVR Drop-Through Rotary Valves are both well-matched with different equipment created by WAMGROUP because of the WAM standard flanges. RV and RVR Rotary Valves can be distinguished through their inlets because RV square inlet while ...

A machine that is used to feed powders and fine-grained bulk materials into pneumatic feed lines. RVS blow-through rotary valves have casing cover and a drive unit. Its rotor is mounted horizontally with an oblique V-shaped cross section ...

RVC Drop-Through Rotary Valves are devices that consist of either a stainless steel casing or one made of tubular cast iron. These drop-through rotary valves by RVC are fitted with a host of V-shaped oblique cross section compartments ...

The RW Drop-Through rotating regulator with quadrangle inlet is made of a cylindrical cast iron covering. The flat escalated rotor among four V-fashioned section cubicles is made from wear-defiant HARDOX steel. A HARDOX ridge at the inlet ...

The stainless steel casing used with the DVA Diverter Valve is lined with an abrasion resistant SINT® engineering polymer composite, and fitted with a SINT® polymer flap and steel core. The flap on this valve can be activated ...

Star valves with rubber blades, complete with gearbox.

Filtration size: 5 µm - 10 µm
Flow rate: 0.5 m³/s - 50 m³/s