Samplers

No condenser is required in the Permeation based drying system thus highly soluble gases like SO2, NO2, and HCI can avoid being lost. It is possible for direct span gas injection to the probe to be made. For reduced maintenance count ...

The AMESA system is intended for the long term sampling of dioxins, furans and other Persistant Organic Pollutants. The Long Term Dioxin Sampler AMESA could be utilized, for instance, in reject incinerators, unsafe material incinerators, ...

TThe MICA 2M, manufactured by Environemwnt S.A is a sample handling system utilized for pumping and conditioning the exhaust gas from the engine to the testing cabinet and analysers. Furthermore it has a sampling trolley along with a ...

The TGD 152 is a high volume sampler developed by the French Atomic Energy Commission. The device is used for particulate sampling for radionuclide monitoring. It is also capable of particulate sampling for ambient air quality monitoring. ...

The PRL series is manufactured by Eriez Magnetics Europe Limited. It is a rotating cup bulk solid sampler/rotary sector cutter from the line of PRL primary samplers.

The PCB Cross Belt Sampler is manufactured by Eriez®, and is a unit that acquires typical granular material sample directly through a moving trough belt type conveyor. It has a motion that is in one direction in which it cleanly sweeps ...

A wide range of scaled production units for laboratory testing of dry and wet material samples. Laboratory Equipment These units are used extensively in test laboratories and pilot plants in universities or research establishments, commercial ...

Multipoint Sampler INNOVA 1409 Full remote-control from a PC via the gas monitor over the USB interface 6 to 24 sample input channels depending on the configuration Integrates seamlessly with the Innova PAS monitors LED indicators ...

The MPTS is an automatic dispenser for powders. It is equipped with a volumetric feeder that ensures safe sampling of toxic and explosive powders. Possessing zero mechanical components, this automatic dispenser is capable of sampling ...

The Liquid Dampler is a swab and sampler developed by Merck Millipore. The Sampler is mainly used to monitor microbiological organisms in liquids using self-contained dip testers. The Swab Test Kit also monitors microorganisms on ...

The cyclone has been designed following ISO 9001 standards and meets the specifications reported by USEPA Method 201A. This method concerns the sampling at constant flowrate at actual emission conditions usingan in-stack filterholder. The ...

The Isostack G4 is available in two versions: all in one (G4-one) and split (G4-two), both available with a 4 or 8 m3/h pump to meet different types of use.The functionalities of the software allow you to manage the sampling in an easy ...

DDS is equipped with a membrane pump, a precision flow meter and a dry gas meter. The two streams are regulated independently, so the dilution ratio should be changed to satisfy different stack conditions. The temperatures inside the ...

Bravo Basic is the economic portable constant flow rate sampler suitable for dust and gas sampling either in stack or in ambient. It is equipped with an LCD-type week-based timer, allowing you to turn the pump on and off. The digital ...

The ECHO HiVol is a standalone automatic instrument designed to be used outdoors even in severe weather conditions. The Echo Hi Vol uses a Venturi gas meter which gives it many advantages, such as measuring stability in the long term, ...